Product ID:236 DISPERSION
MSDS Date:10/11/1994
FSC:6850
NIIN:00F005027
MSDS Number: BYHPL

DOW CORNING CORPORATION

3901 SOUTH SAGINAW ROAD
MIDLAND, MI 48686-5601
US

Emergency Phone: 517-496-6000/517-496-5900

Info Phone: 517-496-6000/517-496-5900

Cage: 5D028

DOW CORNING CORP

997 MIDLAND, MI 48686-0997 US

Telephone: 517-496-6000/517-496-6315

Cage: 5D028

XYLENE, DIMETHYLBENZENE, XYLOL (IARC - GROUP 3) *95-4*

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 2%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM, SKIN

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

2-BUTANONE, O,O',O''-(ETHENYLSILYLIDYNE TRIOXIME, VINYL

CAS: 2224-33-1

Fraction By Weight: 3%

LIGHT ALIPHATIC NAPHTHA, VM & P NAPHTHA, LACOLENE

CAS: 64742-89-8

Fraction By Weight: 30-50%

OSHA PEL 300 PPM

ACGIH TLV: 300 PPM

SILICON DIOXIDE, CELITE 322, AMORPHOUS SILICA GEL *95-4*

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: 2%

OSHA PEL 80 MG/CUM

ACGIH TLV: 0.2 MG/CUM

TITANIUM DIOXIDE, TIO2 (SUSPECTED ANIMAL CARCINOGEN, IARC

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 30%

OSHA PEL 15 MG/CUM

ACGIH TLV: 10 MG/CUM (DUST)

HYDRATED ALUMINA, ALUMINUM HYDROXIDE, ALUMINUM OXIDE

CAS: 21645-51-2

RTECS: BD0940000

Fraction By Weight: 21%

OSHA PEL 15 MG/CUM (DUST)

ACGIH TLV: 2 MG/CUM (DUST)

ETHYL BENZENE *95-4*

CAS: 100-41-4

RTECS: DA0700000

Fraction By Weight: 0.6%

OSHA PEL 435 MG/CUM

ACGIH TLV: 434 MG/CUM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

SILOXANES & SILICONES DI-ME HYDROXY-TERMINATED *95-4*

CAS: 70131-67-8

Fraction By Weight: 33%

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: SEVERE IRRITATION. SKIN:
IRRITATION & SOME CORNEAL INJURY LASTING SEVERAL DAYS. SKIN:
IRRITATION, BURN, SENSITIZATION. INHALATION: IRRITATE NOSE & THROAT
& CAUSE INJURY TO BLOOD, LUNGS, LIVER, K IDNEYS, NERVOUS SYSTEM.
INGESTION: LARGE AMOUNTS MAY INJURE SERIOUSLY. INHALING LIQUID
WHILE VOMITING CAN INJURE LUNGS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, REDNESS, SWELLING, DROWSINESS,
BURNS, VOMITING.

First Aid:EYES/SKIN: IMMEDIATELY FLUSH W/WATER FOR 15 MINS. INHALATION:
REMOVE TO FRESH AIR. INGESTION: ONLY INDUCE VOMITING AT THE
INSTRUCTIONS OF A PHYSICIAN. NEVER GIVE ANYTHING BY MOUTH TO AN
UNCONSCIOUS PE RSON. OBTAIN MEDICAL ATTENTION IN ALL CASES. TREAT
ACCORDING TO PERSON'S CONDITION & SPECIFICS OF EXPOSURE.

Flash Point Method:CC
Flash Point:53.96F
Extinguishing Media:WATER FOG/SPRAY, CO2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR SCBA & PROTECTIVE CLOTHING. EVACUATE
AREA. HEAT EXPOSURE PRESSURIZES CLOSED CONTAINERS. COOL W/WATER
SPRAY.
Unusual Fire/Explosion Hazard:VAPORS ARE >AIR & MAY TRAVEL TO IGNITION
SOURCES. STATIC ELECTRICITY MAY ACCUMULATE & IGNITE VAPORS. (SEE
SUPP)

Spill Release Procedures:REMOVE IGNITION SOURCES, USE NONSPARKING TOOLS
& EQUIPMENT. TO PREVENT POSSIBLE SPONTANEOUS COMBUSTION, STORE
MATERIALS USED DURING CLEANUP ONLY IN APPROPRIATE
CONTAINERS/COVERED W/WATER. DETERMINE WH ETHER TO EVACUATE/ISOLATE
AREA. (SEE SUPP)

Handling and Storage Precautions:KEEP CONTAINER CLOSED & AWAY FROM
HEAT, SPARKS & OPEN FLAME. KEEP CONTAINER CLOSED & STORE AWAY FROM
WATER/MOISTURE.
Other Precautions:AVOID BREATHING VAPOR, CONTACT W/SKIN/EYES. DON'T
TAKE INTERNALLY.

Respiratory Protection:USE RESPIRATORY PROTECTION UNLESS ADEQUATE LOCAL
EXHAUST VENTILATION IS PROVIDED/AIR SAMPLE DATA SHOW EXPOSURES ARE
W/IN RECOMMENDED EXPOSURE GUIDELINES.
Ventilation:LOCAL EXHAUST: RECOMMENDED
Protective Gloves:SILVER SHIELD/4H
Eye Protection:CHEMICAL WORKERS GOGGLES
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING. REMOVE/LAUNDER
CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
PREVENT FIRE HAZARD BY SUITABLE MEANS, BONDING & GROUNDING, INERT GAS
PURGE, VAPOR DILUTION. DECOMPOSITION PRODUCTS CONT'D: FORMALDEHYDE.
SPILLS CONT'D: LARGE: PROVIDE DIKING/OTHER CONTAINMENT, KEEP F ROM
SPREADING.

Spec Gravity:1.08
Solubility in Water:NONE
Appearance and Odor:WHITE LIQUID

Stability Indicator/Materials to Avoid:YES
WATER & OXIDIZING MATERIAL. PRODUCT EVOLVES METHYL ETHYL KETONE WHEN
EXPOSED TO WATER/MOISTURE.
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAMES, MOISTURE, HUMID
AIR
Hazardous Decomposition Products:THERMAL BREAKDOWN: TRACES OF
INCOMPLETELY BURNED CARBON COMPOUNDS, SILICON DIOXIDE,
METAL/CARBON/NITROGEN (SUPP)

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS. FLAMMABLE LIQUID UN1993.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.